1100 H18 aluminum foil

The aluminum composite panel is composed of multiple layers of materials, the upper and lower layers are high-purity aluminum alloy panels (products of TMR), the middle is a non-toxic low-density polyethylene (PE) core board, and a protective film is pasted on the front side.

The common specification of aluminum composite panel is 1.22Mx2.44M, and the thickness is 3-5MM. Among them, aluminum foil or aluminum skin is one of the raw materials of aluminum composite panel. Its thickness is usually expressed by wire. Aluminum composite panel uses 1100 aluminum foil with a thickness of 8 There are two types of silk: indoor and outdoor according to the purpose. If it is an outdoor board, it can be customized, and the length can be 6M.

The common 1100 h18 aluminum foil roll thicknesses for general aluminum composite panels ACP are as follows:

Aluminum used for facade aluminum composite panels uses 0.20 mm, 0.30 and 0.40 mm, and 0.50 mm. Among them, 0.30 and 0.40 are more common, so the wind pressure resistance is better.

Aluminum foil coils for aluminum composite panels on the inner façade, the thickness of the aluminum foil coils with structures of 0.15mm and 0.12-0.10mm is relatively wide.