Wood grain color coated aluminum foil for construction decoration
| Alloy | 1060 3003 |
| Temper | H24 H14 H16 |
| Width | As per request |
| Thickness | As per request |
| Port of Loading | Qingdao/Shanghai |
| Price | Chat With Us |
Why Wood Grain Color Coated Aluminum Foil Is The Premium Decorative Building Material
Wood grain color‑coated aluminum foil adopts high‑purity aluminum foil substrate (mainly 1000‑series and 3003‑series), combined with advanced roller‑coating and heat‑sublimation wood‑grain transfer technology. It reproduces realistic natural wood visual effect on aluminum foil surface, integrating lightweight metal performance and timber decorative aesthetics. Unlike solid wood, MDF or ordinary color‑coated foil, this material is rot‑proof, insect‑resistant, moisture‑stable and flame‑retardant, widely applied in modern construction interior & exterior decoration projects.
Substrate tempers are mostly O soft temper and H14/H16 semi‑hard temper: O‑temper wood grain color coated aluminum foil delivers superior flexibility for wrapping, laminating and complex curved surfaces; H14 / H16 wood grain color coated aluminum foil gets moderate strain hardening, better flatness and rigidity for flat decorative panels while retaining acceptable bending performance. Aluminum foil itself cannot achieve wood‑grain effect by anodizing; realistic wood texture is realized via chemical conversion pretreatment plus multi‑layer organic coating system (primer + base coat + wood‑grain printing / sublimation + top protective finish).
When choosing coating grades: PE polyester coating is cost‑effective for indoor projects; HDP high‑durable polyester or PVDF fluorocarbon coating is recommended for coastal, outdoor and high‑UV exposure scenarios to resist fading and chalking. Whether you produce ceiling laminates, wall veneers, composite panel facings, door & cabinet wrapping or decorative trim strips, wood grain color‑coated aluminum foil balances decorative appearance, weather resistance and fabrication practicability.
Select O temper for deep bending, curved‑surface lamination and complex profiling; choose H14/H16 for flat decorative components requiring good flatness without heavy forming.
Core Benefits of Wood Grain Color Coated Aluminum Foil
- Realistic natural wood‑grain appearance, multiple wood species patterns available (oak, walnut, cherry, teak etc.), custom pattern support
- Superior moisture‑proof, anti‑mold, insect‑resistant performance; no rot, warping or cracking compared with real wood
- Light‑weight aluminum substrate, low dead‑load for building decoration; fully recyclable and eco‑friendly timber‑replacement material
- Flexible substrate performance: O‑temper for wrapping & curved lamination; H14/H16 for flat decorative facings
- Multiple coating options: PE for indoor, HDP / PVDF for outdoor & coastal high‑weathering environments
- Good bending, laminating, die‑cutting and slitting processing performance
- Flame‑retardant metal base, meets building fire‑safety requirements for interior decoration
- Surface optional with PE protective film to prevent scratches during fabrication; custom slitting & rewinding service available
- Low maintenance: no painting / waxing required after installation, easy to clean
- Compliant with EN 1396, ASTM B479 standards; mill test reports (MTR) can be provided upon request.
Important note: PE polyester wood‑grain foil is not suitable for long‑term outdoor UV‑heavy exposure. For exterior facade decoration, HDP or PVDF fluorocarbon coating system shall be adopted to avoid fast color fading and coating peeling.
Key Mechanical & Coating Properties of Wood Grain Color Coated Aluminum Foil
Below are typical performance values for wood grain color coated aluminum foil (substrate 1060‑O, 1060‑H14), referenced to ASTM B479, EN 1396; performance varies slightly with foil thickness and coating system.
| Property | Wood Grain CC Al‑Foil 1060‑O | Wood Grain CC Al‑Foil 1060‑H14 |
|---|---|---|
| Base Alloy | 1060 Pure Aluminum | 1060 Pure Aluminum |
| Tensile Strength | 70‑95 MPa | 110‑145 MPa |
| Yield Strength (Rp0.2) | 25‑40 MPa | 85‑115 MPa |
| Elongation A | 20‑35 % | 8‑15 % |
| Density | 2.70 g/cm³ | 2.70 g/cm³ |
| Elastic Modulus | 70 GPa | 70 GPa |
| Coating Type | PE / HDP / PVDF | PE / HDP / PVDF |
| Total Dry Film Thickness | PE:16‑22 µm; PVDF:25‑30 µm | PE:16‑22 µm; PVDF:25‑30 µm |
| Pencil Hardness | ≥ 2H | ≥ 2H |
Important note: 1060‑O wood grain foil is soft, maximum ductility for curved‑surface wrapping, roll‑laminating and complex profiled decoration parts. 1060‑H14 wood grain foil gets moderate work hardening, better flatness and rigidity for flat veneer panels, only suitable for simple bending; avoid sharp small‑radius folding which may trigger coating cracking.
Weather & Corrosion Resistance
Wood grain color‑coated aluminum foil relies on multi‑layer organic coating and pre‑treatment conversion film for anti‑corrosion protection, not native aluminum oxide film. PE‑coated grade performs excellent for indoor dry environment; HDP extends outdoor service life to 8‑12 years; PVDF fluorocarbon coating achieves 15‑20‑year anti‑fading performance for coastal high‑salt‑fog outdoor projects.
If coating suffers scratch damage exposing bare aluminum substrate, local corrosion risk increases. For humid coastal interior or semi‑outdoor locations, PVDF or HDP coating is strongly recommended.
Formability of Wood Grain Color Coated Aluminum Foil
1060‑O temper owns the best flexibility among common wood‑grain aluminum foils, fit for large‑radius bending, profile wrapping, composite panel hot‑laminating. H14 temper can realize simple gentle bending, but not fit for tight‑radius folding. Sharp fold will cause wood‑grain topcoat cracking and delamination.
Minimum bend radius shall be strictly designed according to foil thickness; proper protective film and processing lubricant are required during forming. Avoid over‑bending on H14 foil.
Coating Adhesion Performance
Coating adhesion depends heavily on aluminum surface degreasing and chromate‑free conversion pretreatment. Qualified wood‑grain foil passes cross‑hatch adhesion test without paint peeling. High‑temperature laminating temperature should be controlled; excessive temperature will accelerate coating aging and grain discoloration.
Wood Grain Color Coated Aluminum Foil vs Other Decorative Materials
Wood Grain‑CC‑Al‑Foil O vs H14 vs H16
| Property | Wood Grain‑CC‑Al‑Foil‑O | Wood Grain‑CC‑Al‑Foil‑H14 | Wood Grain‑CC‑Al‑Foil‑H16 |
|---|---|---|---|
| Work‑Hardening Level | Fully annealed soft | Medium semi‑hard | Higher semi‑hard |
| Forming & Wrapping Capacity | Profile wrapping, large‑radius curve lamination | Simple bending, flat veneer | Almost no bending, flat panel only |
| Flatness & Rigidity | Soft, easy to crease without backing | Good flatness | Excellent flatness |
| Typical Application | Door‑profile wrapping, curved decorative components | Wall veneer, ceiling facing | Flat composite panel facings |
Wood Grain Color‑Coated Al‑Foil vs Real Wood Veneer
| Property | Wood Grain Color‑Coated Al‑Foil | Natural Wood Veneer |
|---|---|---|
| Moisture‑Stability | Excellent, no warp / rot | Poor, easy warp, mildew and decay |
| Insect Resistance | Complete resistance | Vulnerable to termite damage |
| Flame Performance | Metal substrate flame‑retardant | Combustible |
| Maintenance Workload | Very low | Regular waxing & painting needed |
| Pattern Consistency | Stable batch‑to‑batch, repeatable grain | Natural random variation, color difference risk |
| Best Use | Humid space, public building decoration | High‑end indoor solid‑wood furniture |
PE‑Coated vs PVDF‑Coated Wood Grain Aluminum Foil
| Property | PE Polyester Wood Grain | PVDF Fluorocarbon Wood Grain |
|---|---|---|
| Anti‑UV / Anti‑Chalking | General, for indoor only | Outstanding, outdoor & coastal |
| Dry Film Thickness | 16‑22 µm | 25‑30 µm |
| Expected Service Life Indoor | 10‑12 years | 15‑20 years |
| Expected Outdoor Service Life | Not recommended | 15‑20 years |
| Unit Cost | Economical | Premium higher cost |
| Best Use | Indoor wall, ceiling, cabinet wrapping | Exterior cladding, semi‑outdoor, coastal decoration |
Quick Selection Guidance for Wood Grain Color‑Coated Aluminum Foil
- Profile wrapping, curved‑surface lamination, complex decorative shapes → Substrate O‑temper
- Indoor flat veneer, ceiling panel, simple bending → Substrate H14‑temper + PE / HDP coating
- Outdoor / coastal decoration, high UV exposure → PVDF fluorocarbon coating (prefer H14‑H16 substrate)
- Pure flat composite panel without bending → H16 temper for superior flatness
Note: PE‑grade wood grain foil shall not be continuously exposed to direct sunlight outdoors.
Typical Applications of Wood Grain Color Coated Aluminum Foil
Building Interior Decoration
- Ceiling laminating facings, suspended ceiling decorative foil
- Interior wall veneer, background wall composite panel surface layer
- Door & window profile wrapping foil, cabinet & wardrobe surface lamination
- Elevator car interior decorative cladding, corridor decorative trim strips
- Partition, screen, indoor decorative profiling wrapping materials
Semi‑Outdoor & Coastal Decoration
- Corridor awning inner decorative facing, sun‑room interior cladding
- Coastal public building semi‑exposed decorative components (must select PVDF coating grade)
- Balcony decorative panel surface material
Composite Panel & New Decorative Material Industry
- Aluminum‑plastic composite panel wood‑grain surface layer
- Honeycomb panel decorative facing
- Fire‑proof decorative board surface laminating foil
Furniture & Fit‑out Industry
- Custom furniture surface lamination, decorative edge band raw material
- Exhibition booth, commercial shop front interior decoration, retail store fit‑out
Other Industrial Decorative Usage
- Lighting housing decorative wrapping, household appliance decorative panels
- Advertising decorative substrates, craft decorative laminating materials
Best Fabrication Practices for Wood Grain Color Coated Aluminum Foil
Material Selection & Receiving Inspection
- Specify clearly in order: substrate alloy + temper + coating system, e.g. “Wood grain color coated aluminum foil,1060‑O, PE coating” or “1060‑H14 PVDF wood grain aluminum foil”.
- Check coil surface upon receiving: scratch, coating peeling, color difference, grain mis‑alignment, oil contamination. Surface defects will expand during slitting, bending and laminating.
- For important projects, request MTR to verify substrate mechanical property and coating test indicators (adhesion, pencil hardness).
- Choose foil with PE protective film for visible decorative surface to avoid scratches in processing.
Slitting & Cutting
- Available processing: slitting, rewinding, die‑cutting, shearing. High‑precision slitting is mainstream for narrow decorative strips.
- Control cutting heat input; avoid overheating which may cause wood‑grain pattern discoloration and coating degradation.
- Remove burrs completely after cutting; burrs may scratch coating surface during subsequent laminating & assembly.
Wrapping, Laminating & Bending
- O‑temper material is preferred for profile wrapping; control laminating temperature according to paint system, do not exceed coating temperature resistance limit.
- H14 foil needs larger minimum bend radius; strictly prohibit sharp crease folding.
- Keep protective film intact during bending & laminating to prevent surface abrasion.
Storage & Handling Guidelines
- Store wood‑grain aluminum foil coils in dry, ventilated warehouse, avoid high‑humidity, condensation and direct sunlight before installation.
- Separate coil layers with interleaving paper during stacking; prevent hard metal contact scratching the coated surface.
- Avoid long‑term compression deformation for soft O‑temper foil coils.
Processing Parameter Reference for Wood Grain Color Coated Aluminum Foil
| Processing Item | Reference Parameters |
|---|---|
| Minimum Bend Radius (1060‑O) | ≥ 1.0 t |
| Minimum Bend Radius (1060‑H14) | ≥ 2.5 t |
| Recommended Laminating Temperature (PE) | 110‑140 °C (no over‑heating) |
| Common Foil Thickness Range | 0.06 mm ~ 0.20 mm |
| Usable Width Range | 100 mm ~ 1600 mm |
| Coil Inner Diameter Options | 300 mm, 405 mm, 505 mm |
| Coating Dry‑Film Thickness PE | 16‑22 µm |
| Coating Dry‑Film Thickness PVDF | 25‑30 µm |
Surface Options for Wood Grain Color Coated Aluminum Foil
- Roll‑Coated Wood Grain Sublimation Finish
Standard production finish; high‑definition simulated grain (oak, walnut, teak, cherry etc.), most widely used for building decoration, cost‑effective. Custom wood‑grain patterns are supported. - PE Protective Film Laminated
Transparent PE film attached to coated side, prevent scratches during slitting, wrapping, laminating and site construction; peel‑off after finishing installation. - Matte / Gloss Surface Option
Matte wood‑grain for low‑glare architectural interior; high‑gloss for special decorative effect according to project design. - Chromate‑Free Conversion Pre‑Treatment
Environment‑friendly pre‑treatment layer, improve coating adhesion and anti‑corrosion performance, fit for green‑building projects.
Common Fabrication Challenges of Wood Grain Color Coated Aluminum Foil
1. Coating cracking when bending / wrapping
H14/H16 foil has limited bending capacity. Too‑small bend radius will cause topcoat cracking.
Solution: Select O‑temper substrate for wrapping and tight‑radius forming; increase bend radius for H‑temper grades; optimize wrapping tool clearance and laminating temperature.
2. Coating peeling, poor adhesion
Caused by insufficient aluminum substrate degreasing, poor conversion pretreatment, or excessive laminating temperature.
Solution: Confirm material pretreatment quality before bulk purchase; strictly control laminating temperature; test small sample first before mass production.
3. Wood‑grain fading under sunlight
Using PE‑coated grade for outdoor direct‑sunlight scenario.
Solution: PE wood‑grain foil only for indoor usage; switch to HDP or PVDF fluorocarbon coating for outdoor / coastal projects.
4. Surface scratch during processing & storage
Hard debris, metal‑to‑metal contact scratch wood‑grain coating surface, affecting decorative appearance.
Solution: Keep PE protective film intact during processing; separate coils / sheets by interleaving paper; maintain clean workshop environment.
How to Select Temper, Coating & Specification for Wood Grain Color Coated Aluminum Foil
Substrate Temper Selection
- 1060‑O: Fully annealed soft temper, maximum flexibility. Best for profile wrapping, curved‑surface lamination, complex‑shape decorative components.
- 1060‑H14: Moderate work‑hardening, balanced flatness and bendability. Best for indoor flat veneer, ceiling facing requiring simple gentle bending.
- 1060‑H16: Higher rigidity, almost non‑bendable. Best for pure‑flat composite‑panel facings without forming requirement.
Important: Clearly write alloy + temper + coating system on purchase order, example: “Wood grain color coated aluminum foil, substrate 1060‑O, PE coating”. Request mill test reports for high‑end public‑building decoration orders.
Size & Tolerance Selection
- Thickness common range: 0.06‑0.20 mm; width:100‑1600 mm; support custom slitting width and rewind inner‑diameter.
- Tolerance follows ASTM B479 or EN 1396 according to project specification.
- Export‑grade coils packed with anti‑moisture interleaving paper, waterproof wrapping and wooden pallet.
Mill Pricing Note
Wood grain color‑coated aluminum foil price depends on substrate temper, foil thickness, coating type (PE / HDP / PVDF), wood‑grain pattern complexity, PE‑film requirement, order volume and certification requirement. PVDF coating brings obvious cost increase comparing with PE grade; custom wood‑grain patterns also generate extra charges.
Is Wood Grain Color Coated Aluminum Foil The Right Material For Your Project?
If you need realistic wood‑grain decorative appearance, moisture‑proof, insect‑resistant, low‑maintenance lightweight metallic decorative material for building interior fit‑out, profile wrapping, composite‑panel facing or semi‑outdoor coastal decoration, wood grain color coated aluminum foil is an ideal timber‑alternative decorative material.
It delivers:
- Realistic simulated wood‑grain visual effect, multiple standard & custom patterns
- Moisture‑proof, mildew‑proof, insect‑resistant, no rot or warping unlike natural wood
- Multiple coating options: PE for economy indoor, HDP / PVDF for outdoor & coastal high‑weather‑resistance scenarios
- O‑temper for wrapping & curved‑surface lamination; H‑temper for flat decorative panels
- Light‑weight, recyclable metal substrate with flame‑retardant performance
- Support custom slitting, rewinding, PE protective‑film; MTR documentation available for commercial‑building projects
If your project requires deep tight‑radius folding on H14/H16 substrate, or you use PE‑grade for long‑term direct‑sunlight outdoor exposure, wood‑grain color‑coated aluminum foil is not suitable. For profile wrapping and curved‑surface work choose O‑temper substrate; for flat indoor veneer select H14+PE; for outdoor coastal projects select PVDF coating grade.
Further Reading References
‑ EN 1396: Aluminium and aluminium‑alloy coil‑coated sheet and strip
‑ ASTM B479: Standard Specification for Aluminum‑Alloy Foil
‑ AAMA 2603 / 2604 / 2605: Performance Specifications for Organic Coatings on Aluminum
‑ ISO 12572: Accelerated weathering test for architectural coatings
Ready to Source Wood grain color coated aluminum foil for construction decoration?
TMR ALUMINUM supplies wood grain color coated aluminum foil in O / H14 / H16 temper, covering full thickness & width range, PE protective‑film option, custom slitting & rewinding service, complete mill test reports. We support standard wood‑grain patterns as well as custom‑pattern development for interior fit‑out, composite‑panel, furniture wrapping and semi‑outdoor decorative projects, with competitive factory‑direct price and flexible lead‑time from prototype samples to mass‑bulk orders.

Export Wooden Case
Suitable for export and high-end customers, strong protection, moisture-proof and anti-collision:
Structure: The aluminum foil roll is first wrapped with moisture-proof materials (such as plastic film, kraft paper), and then placed in a wooden box with lining. Advantages: Suitable for long-distance transportation, moisture-proof, dust-proof and anti-collision.Commonly used for: food foil, medicine foil, household foil, electronic foil and other high-requirement products

Vertical Suspension
Suitable for thinner and heavier aluminum foil rolls: The aluminum foil roll is hung vertically in the wooden box, and the roll core is fixed to the box body by a steel rod or sling. Advantages: Reduce the risk of pressure or deformation of the edge of the aluminum foil during transportation.Commonly used for: high-precision electronic foil, lithium battery foil and other products with high edge requirements

Packaging for narrow strip aluminum foil
Plastic film wrapping + carton or wooden box
Method: Each roll or several rolls is wrapped with moisture-proof plastic film (PE);
The outer layer is protected with kraft paper or foam cushioning material;
Multiple rolls are concentrated in a carton or wooden box;
Suitable for: general industrial foil, such as cable foil, capacitor foil

Pyramid-shaped Packaging
For smaller reels aluminum foil but longer width foil ,we will use Pyramid-shaped Packaging to save the space and shipping cost .
Why Choose TMR Aluminum
We Produce Aluminum Slug/Sheet Plate Coil/Small Roll Foil/Color Coated/Mirrored Aluminum
Rich experience
Own factory, easy control
over delivery and quality
7*24 hours
Our service runs throughout
the whole production process
Accept inspection
Third party inspection
on-site inspection
Multiple payment terms
TT, LC, DP
Get An Instant Quotation
Please fill in the form below(* are required) to send us a brief message, we will get back to you as soon as possible.