6061 Aluminum Block

6061 Auminum Block

The main alloy elements in 6061 alloy are magnesium and silicon. It has medium strength, good corrosion resistance, weldability and good oxidation effect. It is widely used in various industrial structures requiring high strength and high corrosion resistance.

6061 aluminum block,T6 and T651 difference lies in the general case, the internal stress of T6 will be larger, processing will be deformed, the suitable processing state should be T651, he is based on the T6 to stretch, the elimination of internal stress 6061 aluminum alloy is the main alloy element is magnesium and silicon, and form Mg2Si phase. If it contains a certain amount of manganese and chromium, it can neutralize the bad effect of iron; sometimes a small amount of copper or zinc is added to improve the strength of the alloy, but it does not reduce its corrosion resistance obviously; there is a small amount of copper in the conductive material to offset the adverse effects of titanium and iron on the conductivity of the alloy; zirconium or titanium can refine grain and control recrystallization; for the sake of improvement. It is machinable and can be added to lead and bismuth. Solid solution to Mg2Si in aluminum has the function of artificial aging hardening. The main alloy elements of 6061 aluminum alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect. Alcoa 6061 has excellent properties such as excellent processability, good corrosion resistance, high toughness, no deformation after processing, easy coloring film and excellent oxidation effect.

6061 aluminum block is Al-Mg-Si alloy, medium strength, good plasticity and excellent corrosion resistance. Especially for non stress corrosion cracking, it has good weldability, good corrosion resistance and cold workability. It is a widely used and promising alloy. It can be anodized, and can also be painted enamel, suitable for building decoration materials. It contains a small amount of Cu, so the strength is higher than 6063, but the sensitivity of quenching is higher than that of 6063. The wind quenching can not be achieved after extrusion. It is necessary to re - solution treatment and quenching aging to obtain high strength.

♦6061 aluminum block typical use :

It requires a variety of industrial structures with a certain strength, weldability and corrosion resistance, such as manufacturing trucks, building blocks, ships, tramcars, furniture, machinery parts, precision processing, and so on.

♦6061 aluminum block chemical composition :
Silicon Si:0.40-0.8 iron Fe: 0.7 Cu Cu:0.15-0.40 Mn Mn:0.15 mg Mg:0.8-1.2 Cr Cr:0.04-0.35 Zn V Ti:0.15 Ti:0.15 Al: Remainder
Other: Single: 0.05 total: 0.15

♦Our products aluminum block has been exported to Sinapore,Turkey,Pakistan,and many other countries,which is very popular,welcome your inquiry.

Aluminum products of TMR meet the export popular

Plastic movie and brown paper can be protected at customers’ need. Also timber case or timber pallet is adopted to shield products from harm for the duration of the delivery.

There are styles of packaging, which is eye to wall or eye to sky. Customers can choose either of them for their convenience.