A380 Aluminum Block
| Alloy | A380 |
| Width | As per request |
| Thickness | As per request |
| Port of Loading | Qingdao/Shanghai |
| Price | Chat With Us |
A380 Aluminum Alloy: Complete Guide to Properties, Composition & Applications
Note: "A380 aluminum" can refer to two completely different materials: the widely used A380 die-casting alloy and the wrought aluminum components used in the Airbus A380 aircraft. This guide focuses on the casting alloy, revealing why it's considered the "workhorse" of the die casting industry.
A380 aluminum alloy is the most widely used aluminum-based die-casting alloy in North America and globally. Renowned as the "workhorse" of the industry, it offers an exceptional balance of castability, mechanical properties, and cost-effectiveness, making it the go-to choice for high-volume, complex, thin-walled components. This comprehensive guide explores its chemical composition, mechanical performance, typical applications, and compares it with common alternatives.
Chemical Composition & Microstructure of A380
The outstanding overall performance of A380 stems from its carefully balanced elemental composition. The table below outlines the typical ranges of its primary alloying elements:
| Element | Range (%) | Primary Function |
|---|---|---|
| Silicon (Si) | 7.5 – 9.5 | Core element; dramatically improves melt fluidity, enabling the casting of complex, thin-walled parts. |
| Copper (Cu) | 2.0 – 4.0 | Primary strengthening element; enhances strength and hardness through solid solution and precipitation hardening. |
| Iron (Fe) | ≤ 1.3 | Critical additive; prevents the molten alloy from sticking to the steel dies (die soldering), extending die life. |
| Aluminum (Al) | Balance | Base matrix, providing lightweight foundation and inherent corrosion resistance. |
Trace amounts of manganese (Mn), zinc (Zn), nickel (Ni), magnesium (Mg), etc., are also present but are not primary strengthens in this alloy.
In the microstructure, the morphology and distribution of silicon and iron-rich phases (such as β-Al5FeSi) are critical to the final mechanical properties. Coarse, needle-like iron phases can significantly reduce ductility, making process control during casting essential.
Key Mechanical & Physical Properties
A380 delivers a well-balanced set of mechanical properties in the as-cast condition, suitable for the vast majority of general-purpose structural applications.
| Property | Typical Value | Significance / Engineering Context |
|---|---|---|
| Ultimate Tensile Strength | ~324 MPa (47 ksi) | Capable of withstanding significant static loads, higher than many other casting alloys. |
| Yield Strength (0.2% offset) | 150 – 165 MPa (22-24 ksi) | Resistance to permanent plastic deformation; ensures parts retain their shape under stress. |
| Elongation at Break | 3 – 4% | Moderate ductility; allows for some deformation but less than wrought alloys. Indicates limited energy absorption before fracture. |
| Hardness (Brinell) | ~80 HB | Good resistance to surface indentation and wear. |
| Density | ~2.71 g/cm³ (0.098 lb/in³) | Approximately one-third that of steel, a key advantage for lightweighting. |
| Thermal Conductivity | ~96 W/m·K | Good heat dissipation capability, suitable for components requiring thermal management like LED housings or motor casings. |
Primary Applications of A380 Alloy
Thanks to its high fluidity, good strength, and cost-effectiveness, A380 is used across numerous industries, especially for high-volume, complex, and thin-walled parts.
- Automotive Industry (Largest Market):
- Powertrain: Transmission housings, engine oil pans, brackets, various pump bodies (oil, water).
- Electric Vehicles (EVs): Motor end covers, inverter/controller housings, structural battery pack components.
- Structural/Chassis: Steering knuckles, suspension components (where ultra-high ductility isn't critical).
- Industrial & Machinery: Gearbox housings, pneumatic/hydraulic components, power tool casings, general industrial frames and brackets.
- Electronics, Appliances & Consumer Goods: High-power LED heat sinks, appliance motor brackets, furniture components (e.g., chair bases), generator/compressor housings, handheld tool enclosures.
- 🔩Other: Various instrument housings, general-purpose connectors, decorative hardware (with surface finishing).
A380 vs. Common Aluminum Alloys
To better understand A380's position, it's helpful to compare it with other frequently used casting and wrought alloys.
| Comparison | Key Differences | Selection Guidance |
|---|---|---|
| A380 vs. A360 | A360 has slightly lower Si and Fe, offering marginally better corrosion resistance and pressure tightness, but significantly poorer fluidity and higher hot tearing tendency. | A380 is the default general-purpose choice due to superior castability and lower cost. Choose A360 only when specific requirements for pressure tightness or corrosion outweigh the casting challenges. |
| A380 vs. A383 (ADC12) | A383 (similar to Japan's ADC12) has higher Si content, providing even better fluidity for ultra-thin-wall castings. Strength may be marginally lower. | For extremely complex, thin-walled parts, A383 may be preferred. For most applications, they are interchangeable, with A380 being more common in North American specifications. |
| A380 vs. 6061 (Wrought Alloy) | This is a fundamental difference between casting and wrought alloys. 6061 is a billet alloy for machining/forming, not casting. It has much higher elongation (>10%) but significantly higher manufacturing cost for complex shapes. | Choose A380 die casting for high-volume, complex geometries at lowest cost. Choose 6061 machining/fabrication for low volumes, designs requiring high ductility, or when welding is necessary. |
Surface Finishing & Corrosion Resistance
- Corrosion Resistance: Due to its 2-4% copper content, A380's resistance to general corrosion is lower than pure aluminum or Al-Mg alloys. In outdoor or humid environments, protective surface coating is essential.
- Painting/Powder Coating: A380 exhibits excellent adhesion for powder coating and e-coating (electrophoretic deposition), making these the most common and effective protection/decorative methods.
- Anodizing: Anodizing is possible but, due to the high silicon content, the resulting oxide layer is typically dark gray to black and lacks the clarity for vibrant colors. It is used more for functional purposes (wear resistance) than decorative finishing.
Conclusion: Why A380 is Ubiquitous
The success of A380 aluminum alloy lies in its masterful balance of critical factors: Exceptional castability → reduces defects, enables complex designs; Good mechanical properties → satisfies most industrial requirements; Stable supply and cost-effectiveness → makes high-volume production economically viable. While specialized alternatives exist for extreme corrosion resistance or high ductility, A380's position as the "workhorse" general-purpose die-casting alloy remains unchallenged for the foreseeable future.
Aluminum Block Package

Aluminum Block Package

Aluminum Block Package

Aluminum Block Package

Aluminum Block Package
-
Inner packing
Anti-rust paper, plastic film wrap to avoid scratch and oxidation -
Outer packing
Solid wooden crate/plywood box, moisture-proof and shockproof -
Bundle way
Fixed with steel straps, prevent shifting during transit -
Label mark
Mark alloy grade, size, weight, quantity, shipping info clearly -
Custom package
Support personalized packaging as client requirements
Aluminum Block CNC Machining
-
Processing range
Cutting, drilling, tapping, milling, turning, chamfering and engraving -
Applicable alloys
1060, 5052, 6061, 6063, 7075, 2024 aluminum blocks -
Precision standard
Tolerance up to ±0.01mm, smooth finished surface -
Available surface finishes
Anodizing, sandblasting, polishing, passivation, painting -
Application parts
Mechanical fittings, automotive parts, aerospace components, electronic fixtures -
Custom service
Accept drawings & samples, tailor-made sizes and structures -
Advantages
High processing accuracy, stable performance, short production cycle
Aluminum Block FAQ
1. What is aluminum block?
2. Common aluminum grades
3. Main features
4. Common surface treatment
5. Typical applications
6. Can aluminum block be customized?
7. Delivery time
8. MOQ & Packaging
Why Choose TMR Aluminum
We Produce Aluminum Slug/Sheet Plate Coil/Small Roll Foil/Color Coated/Mirrored Aluminum
Rich experience
Own factory, easy control
over delivery and quality
7*24 hours
Our service runs throughout
the whole production process
Accept inspection
Third party inspection
on-site inspection
Multiple payment terms
TT, LC, DP
Get An Instant Quotation
Please fill in the form below(* are required) to send us a brief message, we will get back to you as soon as possible.