Aluminum Checkered Plate

3003 aluminum diamond plate

Alloy : 1350 1050 1060 1070 3003
Width : 500-1500mm
Thickness : 1.0-10mm
Port of Loading : Qingdao
Price : $2000

  • PRODUCT DETAIL
  • FAQ

3003 Aluminum is alloyed with 1.20% manganese, which increases the strength of 3003 over commercially pure aluminum (1100 series). 3003 has excellent workability, weldability, and good corrosion resistance. It is used for drawing, forming, spinning, fuel tanks, sheet metal works and other applications that require moderate strength for an aluminum with good weldability. H14 designates the temper, and means that 3003 has been strain hardened and partially annealed. In this condition, 3003 can be easily formed. Embossing or debossing 3003 in this temper should not strain or crack the aluminum. 3003 Aluminum tread checkered plate sheet- Often referred to as diamond plate, it has the same properties of 3003-H14, while excellent at resisting corrosion, and strong for light weight aluminum applications. The diamond trend pattern is slip-resistant and cosmetically appealing.

Description 3003 Aluminum diamond plate

Alloy:3003

Temper:H12,H22,H24,H114

Thickness:1mm-10.0mm

Width:600mm-1500mm

Length: up to 11000mm for sheet

ID:508mm for coil

Height of bar:0.6mm-1.2mm

Packaging Details of 3003 aluminum diamond plate and coil

Aluminum Checkered coil ( aluminum diamond coil):

1). Each coil to be securely tied with two bands.
2). the contact points of these bands on the coil edge to be protect with edge protectors. 
3). Coil then to be properly wrapped with plastic film ,woven belt, resistant paper.
4). Wooden or iron pallet can be used or as your requirements

Aluminum checkered plate(aluminum diamond plate):

1) The package of 3003 aluminum diamond sheet meet the export standard
2)Plastic film and brown paper can be covered at customers' need
3)Paper interleaf each piece 
4)Wooden case or wooden pallet is adopted to protect products fom damage during the delivery

 Aluminum 3003 is an alloy with very good corrosion resistance and moderate strength. It is not heat treatable and develops strengthening from cold working only. Commonly used in chemical equipment, ductwork, and in general sheet metal work. Aluminum 3003 is also used in the manufacture of cooking utensils, pressure vessels,  builder's hardware, eyelet stock, ice cube trays, garage doors, awning slats, refrigerator panels, gas lines, gasoline tanks, heat exchangers, drawn and spun parts, and storage tanks. Order 3003 Aluminum Diamond Plates - Tread Brite in 3003 Aluminum in small quantities and no minimums of all Aluminum 3003 at The TMR aluminum.

Aluminum bright diamond tread plate (also sometimes known as checker plate or floor plate) is available in the alloy 3003-H22. Aluminum diamond plate has a bright finish in the 3003-H22 alloy. Aluminum diamond plate is strong and lightweight. It is also corrosion-resistant and moisture-resistant, making it great for outdoor or indoor use. The diamond plate has a beautiful pattern that is slip-resistant and provides great traction. Aluminum diamond plate has the raised diamond pattern on one side and the reverse side is smooth.

Featurer of 3003 aluminum diamond plate

Excellent at resisting moisture and strong for its light weight. Diamond Tread pattern is slip-resistant and cosmetically appealing for hundreds of decorative applications. Available in a brilliant, high polished, reflective shine.

Application of 3003 aluminum diamond plate

USES:Diamond Plate Flooring, Diamond Plate Wall Panels, Diamond Plate Trim, Diamond Plate Counter Tops, Diamond Plate Dance Floor, Diamond Plate Floor Tile, Diamond Plate Tool Boxes, Diamond Plate Truck Bed, loading ramps,stair tread,dock plate,dock board,decorative purposes,fire trucks,ambulances,recreational vehicles,footplate of car and steamboat staircase.

As a China based aluminum manufacturer,TMR aluminum also could supply other aluminum tread plate:1100 aluminum checkered plate,1060 aluminum checkered plate,1050 aluminium tread plate,3105 aluminium tread plate,5005 aluminum tread plate,5052 aluminum tread plate,6061 aluminum tread plate,5083 aluminium tread plate,5754 aluminum tread plate.

the surface type of aluminum checkered plate:

a. Big five bars aluminum checkered plate

b.Small five bars aluminum tread plate

c.Aluminum diamond plate ,also called one bar or pointer aluminum tread plate

d.Two bars aluminum chequered plate

e.Three bars aluminum checkered plate

FAQ

1. What's the MOQ?
Usually, CC materials for 3 tons, DC materials for 5 tons, some special products is different, pls consult our salesman.
2. What's the payment term?
LC ,TT
3. What's the lead time?
Common specification 10 -15 days, others 30 days or so.
4. How about the packaging?
Standard export packaging, wooden cases or pallets.
5. Could you send us the free sample?
Yes, the small pieces can be provided for free, but the buyer need to bear the freight charges.

Inquiry

Tel: +86-13383985480      E-MAIL: sales@tomorrowal.com

All fields marked with * are necessary.