(1).png)
(1).png)
(1).png)
(1).png)
(1).png)
3005 aluminium circle
| Alloy | 1060, 1070, 1100,5052, 3003 3005 |
| Temper | O H14 H24 |
| Diameter | 20-2300mm |
| Thickness | 0.02-10mm |
| Port of Loading | Qingdao NINGBO |
| Price | Chat With Us |
Descpription of 3005 aluminium circle
3005 is an aluminum alloy with manganese as its primary alloying element, supplemented with a magnesium addition which makes it stronger than 3003 alloy
Chemical composition of 3005 aluminium circle
Silicon Si: 0.6
Iron Fe: 0.7
Copper Cu: 0.3
Manganese Mn: 1.0～1.5
Magnesium Mg: 0.2～0.6
Chromium Cr: 0.1
Titanium: 0.1
Zinc Zn: 0.25
Aluminum Al: margin
Mechenical Property of 3005 aluminium circle
| Alloy | Temper | Thickness(mm) | Tensile Strength(Mpa) | The Yield Strength(Mpa) | elongation(%) | hardness(HV) |
| 3005 | 0 | >0.2-0.5 | 115-165 | ≥45 | ≥13 | 35-45 |
| >0.5-1.0 | ≥20 | |||||
| >1.0-4.0 | ≥25 | |||||
| H22 | >0.2-0.5 | 145-195 | ≥110 | ≥10 | 40-60 | |
| >0.5-1.0 | ≥15 | |||||
| >1.0-4.0 | ≥15 | |||||
| H24 | >0.2-0.5 | 170-215 | ≥130 | ≥6 | 58-70 | |
| >0.5-1.0 | ≥8 | |||||
| >1.0-4.0 | ≥10 | |||||
| H26 | >0.2-0.5 | 195-240 | ≥160 | ≥3 | 65-83 | |
| >0.5-1.0 | ≥4 | |||||
| >1.0-4.0 | ≥6 | |||||
| H18 | >0.2-0.5 | ≥220 | ≥200 | ≥2 | 80-100 | |
| >0.5-1.0 | ≥3 | |||||
| >1.0-4.0 | ≥3 |
Application of 3005 aluminum circle
|
Series
|
Temper
|
Alloy
|
Character
|
End use
|
|
1 series
|
O
H*2 H*4 H*6 H18 H111 H112
|
1050
|
1,Aluminum content :> 99%,excellent formability
2,High reflectivity
3,Stable performance for surface anodization
|
1.Ordinary cookware: post-process: sanding, sandblasting, extrusion pot lid; aluminum pot;
2.Lamp accessories: lampshade, etc. for downlights, laminate lights and street lights
3.Indication signs and building materials: traffic signs, curtain walls, ceilings
|
|
1060
|
||||
|
1070
|
||||
|
1100
|
||||
|
3 series
|
3003
|
1,Excellent formability
2,High elongation, can be used in deep drawing process
3,High grain grade, smooth surface and high reflectivity
|
1.Advanced cookware: post-process: anodizing, enamel, spraying, deep drawing, etc.; non-stick pan; pressure cooker;
2.Lamp accessories: lampshade, etc. for downlights, laminate lights and street lights
3.Indication signs and building materials: traffic signs, curtain walls, ceilings
|
|
|
3004
|
||||
|
3005
|
||||
|
3105
|
||||
|
5 series
|
5052
|
1.Low material density and low weight of finished product
2,High tensile strength and elongation, good fatigue strength
3.Higher grain grade and good surface finish
|
1.Advanced cookware: post-process: anodizing, enamel, spraying, deep drawing, etc.; non-stick pan; pressure cooker;
2.Pressure vessel: pressure cooker, etc.
|
|
|
5754
|
||||
|
5083
|
||||
|
8 series
|
8011
|
1,Excellent anodizing effect,
2,Stable performance and high surface quality.
|
Advanced cookware: can make pearl anodized cookware
|
3005 aluminum circle is usually used in the rice cooker ,welcome your inquiry.
How to pack aluminum circle
What cautions should people follow in packing aluminum circle/discs?
First, tic-tac-toe frame is usually chosen for aluminum circle packaging. The frame consists of four wooden bars, two fixed above and the other two below. The upper bars must be made into arches and fixed by bolts. The height of lower bars must meet requirements for forklift. These bars are also fastened with bolts, which should be below the upper arches so that packed circles will not be damaged.
Second, it’s necessary to wrap aluminum circles with a layer of cloth with medium property or weak acid before putting packaging sheet into the cloth. Connecting parts must be fixed with packaging tapes. Both the top and bottom side of packed circles should be covered by soft pads to protect them from scratches.
Third, wrap stacks of circles and drying agents with plastic cloth which should be sealed with packaging tapes. Then another layer of water-proof cardboard is applied to cover the plastic cloth. All possible gaps must be sealed.
Fourth, put packed aluminum circles into the tic-tac-toe frame which is to be fastened again by steel ropes. Then stick a box label onto each stack. The label should display weight load, packaging cost, delivery methods, unpacking ways and other necessary cautions.
Can you provide DC or CC aluminum circle ?
We are able to provide both .
How do I choose the right alloy for my application?
It depends on your process and end-use. For deep drawing cookware, 1050 or 1060 is ideal. Forcorrosion resistance andstrength, 3003 or 5052 is better. We can help you select the right grade based on your needs.
Will the aluminum disc crack during deep drawing or spinning?
No, our discs are produced with high elongation and stable grain structure, ensuring excellent deepdrawing and spinning performance without cracking.
Can I request a specific diameter, thickness, or shape?
Yes, we offer full customization — diameter, thickness, center holes, and even triangle, square, oroval shapes can be produced based on your drawings or specifications.
Are your aluminum circles safe for cookware and food contact?
Yes, our cookware-grade aluminum meets LFGB and FDA standards. Material certificates and compliancedocuments are available upon request.
I'm worried about surface defects — can I get a sample first?
Absolutely. We offer free samples so you can verify the surface quality, thickness, and suitabilitybefore placing a bulk order.
What if I can' t find my required size in your stock?
Just contact us. We provide custom cutting and mold services to meet your exact size and tolerancerequirements.
What are the advantages of using aluminum circles for cookware?
They offer excellent flatness for automated production, uniform surface for coating, and superiorheat conductivity for even cooking performance.
Why Choose TMR Aluminum
We Produce Aluminum Slug/Sheet Plate Coil/Small Roll Foil/Color Coated/Mirrored Aluminum
Rich experience
Own factory, easy control
over delivery and quality
7*24 hours
Our service runs throughout
the whole production process
Accept inspection
Third party inspection
on-site inspection
Multiple payment terms
TT, LC, DP
Get An Instant Quotation
Please fill in the form below(* are required) to send us a brief message, we will get back to you as soon as possible.
