DC aluminum circles

DC aluminum circles

Alloy:1050,1060,1070,1100,1200,3003,3004,5052,5005,5083,5454,5754
Temper:O.H12,H14,H16,H24,H32,H34,H111,H112
Thickness:0.3mm to 10 mm
Diameter:20mm to 1250mm
Surface treatments :polished ,bright , anodized
another Type:aluminium triangles,aluminum squared,aluminum rectangles,aluminium slugs,
Package: wooden case or wooden pallet ,according to your requirement

DC Aluminum circle application

1, For signs, like regulatory traffic signs, warning traffic signs, guide signs, street signs, route marker signs, expressway signs, recreation and cultural interest signs, emergency management(civil defense)signs, temporary traffic control(construction or work zone) signs, shool signs, railroad and light rail signs, ricycle signs
2.For cookware ,like :fry pans,pizza pans,works electricskillets,pressare cookers,rice cokers,stock pots,cookware bottom,stainless cookware,bottom plates,coated cookware,cookware cover.
3.For spinning,like: lighting,ventilation,satellite,paint,sprayers,cenral vacuum units,filter cartridges,planters,waste recepticles,drip pans,cryogenic tankers,race car whels etc.
4.For light,like:plain aluminium lamps shade,anodized aluminium lamp shade,coated aluminium lamp shade

TMR Aluminum is a professional aluminium manufacturer, mainly produces series-1, series-3, series-5, series-6 and series-8 pure aluminium and aluminium alloy plate/sheet/coil/strip/discs, etc, such as hot -rolled thick plate for molding, aluminium sheet for metal cap, Aluminium Round for cookware, aluminium strip for transformers, aluminium tread/checkered plate, aluminium drilling entry for PCB, aluminium household foil, and so on. We have been exporting Aluminium Round to US, UK, Italy, Germany, Netherlands, Bulgaria, Brazil, Chile, Thailand, Vietnam, Ghana, etc.

How to pack aluminum circle 

What cautions should people follow in packing aluminum circle/discs?

First, tic-tac-toe frame is usually chosen for aluminum circle packaging. The frame consists of four wooden bars, two fixed above and the other two below. The upper bars must be made into arches and fixed by bolts. The height of lower bars must meet requirements for forklift. These bars are also fastened with bolts, which should be below the upper arches so that packed circles will not be damaged. 

Second, it’s necessary to wrap aluminum circles with a layer of cloth with medium property or weak acid before putting packaging sheet into the cloth. Connecting parts must be fixed with packaging tapes. Both the top and bottom side of packed circles should be covered by soft pads to protect them from scratches. 

Third, wrap stacks of circles and drying agents with plastic cloth which should be sealed with packaging tapes. Then another layer of water-proof cardboard is applied to cover the plastic cloth. All possible gaps must be sealed. 

Fourth, put packed aluminum circles into the tic-tac-toe frame which is to be fastened again by steel ropes. Then stick a box label onto each stack. The label should display weight load, packaging cost, delivery methods, unpacking ways and other necessary cautions.

Can you provide DC or CC aluminum circle ?
We are able to provide both .

How do I choose the right alloy for my application?
It depends on your process and end-use. For deep drawing cookware, 1050 or 1060 is ideal. Forcorrosion resistance andstrength, 3003 or 5052 is better. We can help you select the right grade based on your needs.

Will the aluminum disc crack during deep drawing or spinning?
No, our discs are produced with high elongation and stable grain structure, ensuring excellent deepdrawing and spinning performance without cracking.

Can I request a specific diameter, thickness, or shape?
Yes, we offer full customization — diameter, thickness, center holes, and even triangle, square, oroval shapes can be produced based on your drawings or specifications.

Are your aluminum circles safe for cookware and food contact?
Yes, our cookware-grade aluminum meets LFGB and FDA standards. Material certificates and compliancedocuments are available upon request.

I'm worried about surface defects — can I get a sample first?
Absolutely. We offer free samples so you can verify the surface quality, thickness, and suitabilitybefore placing a bulk order.

What if I can' t find my required size in your stock?
Just contact us. We provide custom cutting and mold services to meet your exact size and tolerancerequirements.

What are the advantages of using aluminum circles for cookware?
They offer excellent flatness for automated production, uniform surface for coating, and superiorheat conductivity for even cooking performance.