1050 aluminum coil

1050 aluminum coil

1050 aluminium coil alloy is an aluminium-based alloy in the "commercially pure" wrought family (1000 or 1xxx series). As a wrought alloy, it is not used in castings. Instead, it is usually formed by extrusion or rolling. It is commonly used in the electrical and chemical industries, on account of having high electrical conductivity, corrosion resistance, and workability. 1050 alloy is also sometimes used for the manufacture of heat sinks, since it has a higher thermal conductivity than other alloys. It has low mechanical strength compared to more significantly alloyed metals. It can be strengthened by cold working, but not by heat treatment.

Temper:O H14 H18 H24,etc

Application ：Heat sinks, signs, electronics, lamps, nameplates etc

Chemical Composition:

•Aluminium: 99.5% min
•Copper: 0.05% max
•Iron: 0.4% max
•Magnesium: 0.05% max
•Manganese: 0.05% max
•Silicon: 0.25% max
•Titanium: 0.03% max
•Vanadium: 0.05% max
•Zinc: 0.05% max

Performance
1, with high plasticity, corrosion resistance, electrical conductivity and thermal conductivity;
2, long life, lower cost, but also has a high recovery value;
3,1050 aluminum roll processing technology is mature, the price relative to other high-grade aluminum alloy has a huge advantage.

Welcome your inquiry.

Aluminium Coil Package Method:

Aluminum Coil eye to sky

Aluminum Coil eye to side /wall

Aluminum Coil Wooden Box

Production lead time?
Stock items: 3~7 working days; customized production: 15~25 working days after deposit.

How is your aluminum coil packed for sea shipment?
4-layer standard export package:
Inner wrapped with VCI anti-rust paper + PE film, desiccant inside to avoid moisture & oxidation; core ends sealed with plastic plugs.
Edge protected by EPE foam rings + hard kraft cardboard on both coil faces.
Outer fixed with IPPC fumigated wooden frame/plywood skid complying with ISPM15.
Fastened by steel binding straps; full waterproof PE cover optional for long ocean transit.

Can coils be stacked during loading?
ETS horizontal coils are stackable with wooden blocks for separation; ETSK upright coils are non-stackable normally.

Inspection before delivery?
Mill test certificate (MTC) supplied; third-party inspection (SGS/BV) acceptable.