Welcome To TMR Aluminum

Whatsapp/Skype/Mobile: +86-13383985480

E-mail: sales@tomorrowal.com

Aluminum Sheet

3004 Aluminum Sheet

Alloy: 3004

Width: 100-2600mm

Thickness: 0.01-200mm

Port of Loading: Tianjin Qingdao

Price: $2800

  • PRODUCT DETAIL
  • FAQ

DESCRIPTION OF 3004 Aluminum Sheet 
3004 aluminum is a 3000-series aluminum alloy: the main alloying addition is manganese, and it is formulated for primary forming into wrought products. 3004 is the Aluminum Association (AA) designation for this material. In European standards, it will typically be given as EN AW-3004. AlMn1Mg1 is the EN chemical designation. A93004 is the UNS number. Additionally, the AFNOR designation is A-M1G

Application of 3004 Aluminum Sheet
3004 aluminum sheet is commonly used to produce the body of cans, the light components. It can also be used for the processing and storage equipments of chemical products, sheet processing, some construction tools, etc.

It was developed to satisfy the need for thinner gauges in can-stock, and thereby to some extent replaced its predecessor 3003 alloy in the making of beverage cans. Can-stock can be made thinner due to the addition of 1% magnesium, which contributes in solid solution strengthening.

Main applications of 3004 aluminium sheet: various lamp parts, shutter materials, wide-width curtain wall panels, LCD backing materials, color coated aluminium substrate. It can also be used for the processing and storage equipment of chemical products, sheet processing, some construction tools, etc.

Chemical compositon of 3004 aluminum sheet

Grade Si Fe Cu Mn Mg Cr Ni Zn Al
1050 0.25 0.4 0.05 0.05 0.05 - - 0.05 99.5
1060 0.25 0.35 0.05 0.03 0.03 - - 0.05 99.6
1070 0.2 0.25 0.04 0.03 0.03 - - 0.04 99.7
1100 Si+Fe: 0.95   0.05-0.2 0.05 - - 0.1 - 99
1200 Si+Fe: 1.00   0.05 0.05 - - 0.1 0.05 99
1235 Si+Fe: 0.65   0.05 0.05 0.05 - 0.1 0.06 99.35
3003 0.6 0.7 0.05-0.2 1.0-1.5 - - - 0.1 remains
3004 0.3 0.7 0.25 1.0-1.5 0.8-1.3 - - 0.25 remains
3005 0.6 0.7 0.25 1.0-1.5 0.20-0.6 0.1 - 0.25 remains
3105 0.6 0.7 0.3 0.30-0.8 0.20-0.8 0.2 - 0.4 remains
3A21 0.6 0.7 0.2 1.0-1.6 0.05 - - 0.1 remains
5005 0.3 0.7 0.2 0.2 0.50-1.1 0.1 - 0.25 remains
5052 0.25 0.4 0.1 0.1 2.2-2.8 0.15-0.35 - 0.1 remains
5083 0.4 0.4 0.1 0.40-1.0 4.0-4.9 0.05-0.25 - 0.25 remains
5154 0.25 0.4 0.1 0.1 3.1-3.9 0.15-0.35 - 0.2 remains
5182 0.2 0.35 0.15 0.20-0.50 4.0-5.0 0.1 - 0.25 remains
5251 0.4 0.5 0.15 0.1-0.5 1.7-2.4 0.15 - 0.15 remains
5754 0.4 0.4 0.1 0.5 2.6-3.6 0.3 - 0.2 remains
6061 0.4-0.8 0.7 0.15-0.4 0.15 0.8-1.2 0.04-0.35 - 0.25 remains
6063 0.2-0.6 0.35 0.1 0.1 0.45-0.9 0.1 - 0.1 remains
6082 0.7-1.3 0.5 0.1 0.40-1.0 0.6-1.2 0.25 - 0.2 remains
6A02 0.5-1.2 0.5 0.2-0.6 Or Cr0.15-0.35 0.45-0.9 - - 0.2 remains
8011 0.5-0.9 0.6-1.0 0.1 0.2 0.05 0.05 - 0.1 remains

The Features of 3004 Aluminium Sheet  
3004 aluminium alloy is an alloy in the wrought aluminum-manganese family (3000 or 3xxx series). It is similar to the 3003 alloys, except for the addition of approximately 1% magnesium. It can be cold worked (but unlike some other types of aluminium alloys, heat-treated) to produce tempers with a higher strength but a lower ductility. Like most other aluminium-manganese alloys, 3003 is a general-purpose alloy with moderate strength, good workability, and good corrosion resistance.

1. High Plasticity. 3004 aluminium sheet has high plasticity in annealing state, good plasticity in semi-cold hardening and low plasticity in cold hardening.

2. Finish Well. It can adapt to the maximum speed that most machine tools can achieve so as to milling, boring, planning and other mechanical processing. In addition, 3004 aluminum sheet has good weldability but poor machinability.

3. Slightly Higher Intensity. With the addition of the alloy component Mn, while maintaining the excellent workability and corrosion resistance of pure aluminium, the strength of the 3004 aluminium sheet is slightly increased, higher than that of the 3003 aluminum sheet, and 10% higher than that of the 1100 series.

4. Good Anodic Oxidation. The surface of the 3004 aluminum sheet after anodized has enhanced corrosion resistance and can also present colourful colours.

1. What's the MOQ?
Usually, CC materials for 3 tons, DC materials for 5 tons, some special products is different, pls consult our salesman.
2. What's the payment term?
LC ,TT
3. What's the lead time?
Common specification 10 -15 days, others 30 days or so.
4. How about the packaging?
Standard export packaging, wooden cases or pallets.
5. Could you send us the free sample?
Yes, the small pieces can be provided for free, but the buyer need to bear the freight charges.

Inquiry

Tel: +86-13383985480      E-MAIL: sales@tomorrowal.com

All fields marked with * are necessary.