5052 Aluminum Strip

5052 aluminum strip, non-heat-treatable Al-Mg alloy with excellent formability, fatigue strength and atmospheric corrosion resistance. Available in O, H32, H34, H36, H38 for fuel tanks, enclosures, automotive, signage and general marine auxiliary parts.

5052 Aluminum Strip

Alloy AlMg2.5 5052
Temper O, H32, H34, H36, H38
Width 5-2000mm
Thickness 0.2-12mm
Port of Loading Qingdao/Shanghai
Price Chat With Us

Why 5052 Aluminum Strip Is The Most Versatile Al-Mg Strip For General Forming & Corrosion Resistant Parts

5052 aluminum strip is a widely used non-heat-treatable Al-Mg alloy containing 2.2~2.8% magnesium plus small chromium addition. It delivers balanced medium strength, outstanding bendability, good fatigue resistance and reliable atmospheric corrosion resistance. Supplied in aluminum coil and precision slit narrow strips, it is the workhorse material for automated stamping, roll forming, bending and welded assemblies across automotive, electronic, architectural and light marine industries. Unlike heat-treatable alloys, 5052 gains strength only through cold work hardening.

Compared with 5083, 5052 features superior formability and lower raw cost, though seawater corrosion resistance and cryogenic toughness are slightly lower. It is available in multiple tempers including O, H32, H34, H36 and H38. O temper is for deep drawing and complex forming; H32/H34 are the most popular commercial grades balancing strength and ductility, while H36/H38 offer higher rigidity for flat reinforcement strips.

Whether you are producing fuel tank components, electrical enclosures, signage, cabinet frames or coastal auxiliary parts, selecting 5052 aluminum strip reduces forming cracking risk and delivers stable performance in humid and mildly corrosive environments.

Core Benefits of 5052 Aluminum Strip

  • Excellent formability and bending performance, suitable for deep drawing, roll forming and complex stamping
  • Good fatigue strength, stable under repeated vibration and cyclic loading
  • Great atmospheric and coastal corrosion resistance for outdoor and humid applications
  • Reliable weldability; welded joints retain good strength after welding
  • Non-heat-treatable alloy; strength controlled by cold rolling and stabilization
  • Cost-effective compared with higher magnesium alloys such as 5083
  • Available as continuous coil and custom slit width for automated high-volume production
  • Good surface stability, compatible with painting, powder coating and anodizing
  • Lightweight, ideal for weight reduction in transport and equipment components
  • Multiple temper options to match your forming or rigidity requirements

5052 aluminum strip is excellent for general corrosion-resistant sheet metal parts. It is not recommended for continuous immersion in seawater or critical marine structural components; for those heavy-duty marine applications, 5083 H116/H321 is the better choice.

Chemical Composition of 5052 Aluminum Strip (wt%)

Element Content Range
Aluminum (Al) Balance
Magnesium (Mg) 2.20 – 2.80
Chromium (Cr) 0.15 – 0.35
Silicon (Si) ≤0.25
Iron (Fe) ≤0.40
Copper (Cu) ≤0.10
Manganese (Mn) ≤0.10
Zinc (Zn) ≤0.10
Titanium (Ti) ≤0.05
Others (single) ≤0.05

Key Mechanical & Physical Properties of 5052 Aluminum Strip

Mechanical properties vary greatly by temper; typical values are shown below:

Property 5052-O 5052-H32 5052-H34 5052-H36 / H38
Tensile Strength 170–215 MPa 210–260 MPa 235–285 MPa 255–320 MPa
Yield Strength (0.2%) 65–110 MPa 130–180 MPa 160–215 MPa 190–260 MPa
Elongation 18–25% 7–14% 5–10% 3–8%
Density 2.68 g/cm³ 2.68 g/cm³ 2.68 g/cm³ 2.68 g/cm³
Elastic Modulus 70 GPa 70 GPa 70 GPa 70 GPa
Brinell Hardness ~47 HB ~60 HB ~68 HB ~73–77 HB

Important note: 5052 cannot be strengthened by heat treatment. Strength is achieved by cold rolling and stabilization. H32 and H34 are the most widely used tempers for stamping and bending. Harder H36/H38 are limited to simple forming and flat parts requiring higher stiffness.

Corrosion Resistance

5052 aluminum strip forms a stable protective oxide layer, providing excellent resistance to atmospheric corrosion, coastal salt spray and fresh water. It performs well in humid industrial environments. Its corrosion resistance is lower than 5083 under continuous seawater immersion. Galvanic corrosion protection is required when directly coupled with copper or stainless steel in salt-laden environments. Not suitable for strong acid or strong alkaline environments without coating protection.

Welding Performance

5052 has good weldability using TIG and MIG welding. Welded regions retain good ductility and strength. No post-weld heat treatment is needed. Welded parts can still serve in mild corrosive environments. For critical marine immersion service, 5083 is preferred.

Formability & Processing Behavior

O temper offers maximum ductility for deep drawing, spinning and complex deep forming. H32 balances strength and bending capacity for most general sheet metal jobs. H34 can handle moderate bending, while H36/H38 are only for gentle bending or flat components. Slit edge quality is critical: burrs and micro cracks may propagate during bending or fatigue loading.

Surface Treatment Compatibility

5052 aluminum strip supports degreasing, conversion coating, chromate passivation, liquid paint, powder coating and anodizing. It produces a smooth matte anodized finish, widely used for decorative panels, nameplates and electronic enclosures.

5052 Aluminum Strip vs 5083 / 3003 / 1060 Aluminum Strip

  • 5052 Aluminum Strip: AlMg2.5, balanced strength & excellent formability, good atmospheric corrosion, cost competitive; fuel tanks, cabinets, signage, coastal auxiliary parts.
  • 5083 Aluminum Strip: High Mg marine grade, superior seawater corrosion & cryogenic toughness, higher strength, less formability; ship, LNG, offshore welded structures.
  • 3003 Aluminum Strip: Al-Mn alloy, moderate strength, great formability, low cost; heat exchangers, architectural parts, general packaging.
  • 1060 Aluminum Strip: Pure aluminum, ultra ductility, high conductivity, low strength; heat sinks, conductive components, simple stamping.

Critical purchasing tip: Specify temper clearly on purchase order. Select O temper for deep drawing; H32/H34 for most stamped metal parts. For continuous seawater immersion applications, upgrade to 5083.

Alloy Comparison: 5052 vs 5083 Aluminum Strip

Property 5052 Aluminum Strip 5083 Aluminum Strip
Magnesium Content 2.2–2.8% 4.0–4.9%
Seawater Immersion Corrosion Good Excellent
Formability & Deep Drawing Excellent Moderate
Cryogenic Toughness Good Outstanding
Strength Level Medium Medium-High
Raw Material Cost Economical Higher premium
Best Application Fuel tanks, enclosures, signage, coastal auxiliary parts Shipbuilding, LNG, offshore and pressure vessel welded structures

Quick Alloy & Temper Selection Guidance for 5052 Aluminum Strip

  • Deep drawing, spinning, complex forming → 5052-O Aluminum Strip
  • General stamping, bending, fuel tank parts, enclosures → 5052-H32
  • Higher rigidity, semi-structural stamped brackets → 5052-H34
  • Flat reinforcement strips, minimal forming required → 5052-H36 / H38

Typical Applications of 5052 Aluminum Strip

Automotive & Transportation

  • Automotive fuel tank blanks, fuel line components and trailer body parts
  • Truck & bus interior panels, lightweight brackets and reinforcement strips
  • Off-road vehicle corrosion-resistant auxiliary components

Electrical & Enclosure Industry

  • Electrical cabinets, control box shells, chassis and shielding parts
  • Electronic device frames, nameplates and decorative panels
  • Power equipment housing and junction box components

Architectural & Signage

  • Building facade trim, roofing, gutter and flashing components
  • Advertising signage, laser cut letters, decorative metal panels
  • Lighting fixture housings and reflector bases

Light Marine & General Engineering

  • Boat interior fittings, deck trim, non-critical marine auxiliary parts
  • Hydraulic equipment housings, pressure tank accessories
  • Stamped hardware, pipe clamps and corrosion-resistant brackets

Manufacturing Best Practices for 5052 Aluminum Strip Processing

5052 aluminum strip has excellent forming performance, but slit edge quality, bend radius and dissimilar metal contact still need attention.

Incoming Strip Inspection

  • Verify alloy grade and temper before production; confirm H32/H34 for standard stamping jobs.
  • Check surface for scratches, oil stains, pits and oxide defects; inspect slit edges for burrs and micro cracks.
  • Confirm thickness, width tolerance and coil inner diameter match your slitting or stamping line.
  • Request MTR for batch traceability for engineering and OEM projects.

Bending & Forming Guidelines

  • O temper supports tight-radius bending and deep drawing; harder tempers require larger bend radii.
  • Protect strip surface during forming to avoid scratches which become corrosion initiation points.
  • Control stamping speed and lubrication to prevent galling and surface marks.

Welding Recommendations

  • Use TIG/MIG welding with matching 5052 filler wire.
  • Fully clean surface oil, grease and oxide layer before welding.
  • For coastal service, apply protective coating after welding for longer service life.

Slitting & Cutting

  • High precision slitting blades produce clean low-burr edges, reducing cracking risk during bending.
  • PE film lamination available to protect surface during slitting and handling.
  • Deburr edges for parts under fatigue or vibration loading.

Surface Protection Options for 5052 Aluminum Strip Components

  1. Conversion Coating / Chromate Passivation
    Improve corrosion resistance and provide excellent adhesion base for paint, widely used for enclosure and fuel tank parts.
  2. Liquid Paint & Polyurethane Coating
    Extra protection for coastal outdoor components, extend service life under salt spray.
  3. Powder Coating
    Durable matte or gloss finish for architectural panels and electrical housings.
  4. Anodizing
    Smooth matte anodized surface for decorative signage and nameplates.
  5. PE Protective Film Lamination
    Temporary surface protection during stamping, bending and assembly.

Common Manufacturing Challenges of 5052 Aluminum Strip

1. Cracking during tight-radius bending

Root causes: wrong hard temper selected, insufficient bend radius, poor slit edge burrs / micro cracks.
Solution: Switch to O or H32 temper; increase bend radius; use high-quality deburred slit edges.

2. Corrosion in coastal / salt spray environment

Root causes: uncoated surface, scratches exposing bare aluminum, galvanic contact with copper/stainless steel.
Solution: Apply conversion coating + paint; add insulating gaskets between dissimilar metals.

3. Edge burrs and micro-cracks after slitting

Root causes: worn slitting knives, improper blade clearance.
Solution: Maintain sharp slitting tooling; inspect edges before stamping and bending.

4. Poor anodizing uniformity

Root causes: surface oil contamination, uneven rolling texture.
Solution: Full degreasing before anodizing; select mill finish with controlled surface texture.

How to Select Alloy, Temper & Specification for 5052 Aluminum Strip

Temper Selection Guide

  1. O Temper (Fully Annealed): Maximum ductility, ideal for deep drawing, spinning and complex formed parts.
  2. H32: Strain hardened and stabilized, balanced strength and formability, most popular general-purpose temper.
  3. H34: Higher strength, suitable for semi-structural stamped components with moderate bending.
  4. H36 / H38: Higher rigidity, limited ductility, for flat parts with little or no forming.

Important: Clearly mark alloy + temper on PO, e.g. “5052-H32 aluminum strip”. Specify surface protection and edge requirements for precision stamping projects.

Strip Sizing & Specification Best Practice

  • Thickness: 0.05mm up to 6.0mm; custom thickness tolerance available.
  • Slit width: custom narrow slitting according to customer stamping and roll forming line.
  • Edge options: standard slit edge, deburred edge, round edge.
  • Surface: mill finish, single or double side PE protective film.
  • Documentation: Mill Test Reports (MTR) available for OEM and engineering projects.

Mill Pricing Note (2026 Reference)

5052 aluminum strip is more cost-effective than 5083. Price depends on temper, thickness, slit width, edge quality, PE film protection, order volume and tolerance requirements. Narrow precision slitting and tight thickness tolerance add extra processing cost.

Is 5052 Aluminum Strip Suitable For Your Project?

If you manufacture stamped fuel tank parts, electrical enclosures, signage, cabinet frames, coastal auxiliary components and light marine fittings requiring good formability and moderate corrosion resistance, 5052 aluminum strip (O, H32, H34, H36, H38) is your ideal slit coil raw material.

It delivers:

  • Excellent formability for deep drawing, bending and automated stamping production
  • Good atmospheric and coastal salt spray corrosion resistance
  • Balanced medium strength and good fatigue performance under vibration
  • Good weldability and compatible with painting, powder coating and anodizing
  • Multiple temper choices to match forming and rigidity requirements
  • Cost competitive pricing compared with higher magnesium marine grade alloys

For critical continuous seawater immersion, cryogenic and heavy welded marine structures, 5083 aluminum strip is recommended instead of 5052.

Further Reading References

  • ASM Handbook: Aluminum alloy forming and corrosion guide
  • Aluminum Association: ANSI H35.1 alloy and temper specification
  • ASTM B209, EN AW-5052 AlMg2.5 aluminum alloy standard

Ready to Source 5052 Aluminum Strip?

TMR ALUMINUM supplies precision slit 5052 aluminum strip in O, H32, H34, H36 and H38 tempers. Mill test reports, PE surface protection, custom slitting and competitive factory direct pricing for prototype and mass production orders for automotive, electronic, architectural and light marine industries.

Aluminum Strip Packaging Methods

  • Big coil packing
     
    Inner: VCI anti-rust paper + PE moisture-proof film.
     
    Middle: Paper edge protector + kraft paper.
     
    Outer: Fumigation-free wooden pallet, fixed with steel strips and stretch film.
     
  • Small slit coil packing
     
    Each coil packed with anti-rust bag and moisture-proof bag, then put into strong corrugated carton, finally packed on pallet.
     
  • Flat sheet / strip packing
     
    Separate each layer with anti-rust paper, bundled with packing belt, loaded on wooden support.
     
  • Premium packing
     
    Vacuum packaging, anti-static bag, custom wooden case for high-precision aluminum strip.
aluminium strip Wooden pallet

Aluminium Strip Wooden Pallet

aluminium strip Wooden Box

Aluminium Strip Wooden Box

 

 

1. What thickness range of aluminum strip do you supply?

 
We mainly supply aluminum strip with thickness from 0.2mm to 6.0mm, including 0.2mm, 0.3mm, 0.5mm, 1.0mm, 1.5mm, 2.0mm and other customized thickness.
 

2. What width tolerance can you reach for slitted aluminum strip?

 
For high precision slitted aluminum strip:
 
  • Width ≤500mm: ±0.2mm
  • Width 500–1000mm: ±0.5mm
     
    Regular grade tolerance can also be provided according to customer requirements.
 

3. What alloys of aluminum strip are available?

 
Common alloys include 1050, 1060, 1070, 3003, 5052, 5083, 6061 pure aluminum and alloy aluminum strip.
 

4. What causes burr on aluminum strip edge?

 
Main reasons: blunt cutter, unreasonable cutter gap or overlap, high slitting speed. We use sharp blades and precise adjustment to ensure burr-free edge.
 

5. How to avoid camber and wavy edge of aluminum strip?

 
We control constant tension, parallel guide rollers, leveling treatment before slitting, and strictly select raw materials to avoid camber and wavy edge.
 

6. What packaging do you use for export aluminum strip?

 
Inner: VCI anti-rust paper + PE moisture-proof film
 
Middle: Paper corner protectors
 
Outer: Fumigation-free plywood pallet, fixed with steel strips and stretch film, suitable for long sea transportation.
 

7. Can you provide custom slitting service?

 
Yes. We provide custom aluminum strip slitting service, can slit coils into your required width, with stable tolerance and neat end face.
 

8. What are the main applications of aluminum strip?

 
Aluminum strip is widely used in electronics, construction, automotive, heat exchangers, hardware stamping, packaging, electrical industry and general industrial manufacturing.
 

9. How to avoid oxidation and black spots on aluminum strip?

 
We use professional anti-rust and moisture-proof packaging, and suggest storing in dry, ventilated warehouse to avoid moisture and rain.
 

10. Can you provide mill test certificate (MTC)?

 
Yes. We provide complete mill test certificate, including chemical composition, mechanical properties, tolerance test report for each batch.
 

11. What is the delivery time for aluminum strip?

 
Regular stock products: 3–7 days. Customized slitting products: 7–15 days according to order quantity.
 

12. Do you accept small trial orders?

 
Yes. We accept small trial orders for customer testing and verification, welcome to send your specification for quotation.

Why Choose TMR Aluminum

We Produce Aluminum Slug/Sheet Plate Coil/Small Roll Foil/Color Coated/Mirrored Aluminum

Rich experience

Own factory, easy control
over delivery and quality

7*24 hours

Our service runs throughout
the whole production process

Accept inspection

Third party inspection
on-site inspection

Multiple payment terms

TT, LC, DP

Get An Instant Quotation

Please fill in the form below(* are required) to send us a brief message, we will get back to you as soon as possible.