5005 Anodized Aluminum Coil

5005 anodized aluminum coil, Al‑Mg alloy, excellent anodizing performance for curtain wall, signage, elevator decoration. Compare with 5052 aluminum coil. AQ grade available 5005 Anodized Aluminum Coil is a non‑heat‑treatable Al‑Mg series alloy (EN‑AW‑5005 / 3.3315). Famous for outstanding anodizing performance with uniform, clear oxide film and low color difference. Widely used in architectural decoration, signage, home appliance appearance parts.

5005 Anodized Aluminum Coil

Alloy 5005
Temper H14 H24
Width 10-1800
Thickness 0.2-10
Port of Loading Qingdao/Shanghai
Price Chat With Us

5005 is non‑heat‑treatable Al‑Mg series alloy EN‑AW‑5005(3.3315). It delivers uniform and transparent anodized film with tiny color difference, widely adopted for architectural decoration, signage and home‑appearance components. Two supply modes: mill‑finish coil for customer‑own anodizing, factory pre‑anodized coil.

Chemical Composition (wt.%, balance Al) 5005 Anodized Aluminum Coil 

Element Si Fe Cu Mn Mg Cr Zn Ti Single impurity Total impurity
5005 ≤0.30 ≤0.70 ≤0.20 ≤0.20 0.50‑1.10 ≤0.10 ≤0.25 ≤0.10 ≤0.05 ≤0.15

AQ anodizing grade: Strictly control Fe‑Si segregation to avoid streaks and black spots.

Mechanical & Physical Properties 5005 Anodized Aluminum Coil 

Temper Tensile Strength(MPa) Yield Strength(MPa) Elongation 50mm(%) Remarks
O 105‑145 35 20‑26 Full‑soft, deep drawing & complex bending
H32 130‑170 105 5‑8 Building decoration, low spring‑back
H34 145‑185 125 4‑7 Signage & curtain wall, balance strength‑formability
H36 160‑200 140 3‑6 High hardness, limited bending
  • Density: 2.70 g/cm³
  • Modulus of Elasticity: 69 GPa
  • Thermal conductivity: 195 W/(m·K)
  • Electrical conductivity: 37‑42 %IACS
  • H3 temper: work‑hardened + thermal stabilization, preferred for anodizing.

5005 VS 5052 Aluminum Coil Comparison 

Item 5005 5052
Magnesium Content 0.50‑1.10 % 2.20‑2.80 %
Anodizing Performance Excellent, clear uniform film, low color difference; AQ grade avoids bar‑coding streaks Good, tends to hazy/misty finish; higher risk of color variation
Mechanical Strength Medium Higher tensile & yield strength
Corrosion Resistance Good for inland & mild coastal; poor for heavy salt‑spray marine Superior, suitable for marine & salt‑rich environment
Typical Application Curtain wall, signage, elevator & appliance decorative panels Fuel tanks, marine components, structural parts
Best‑suited goal Decorative appearance parts Structural anti‑corrosion components

Core Advantages 5005 Anodized Aluminum Coil 

  • Premium anodizing performance: clear oxide coating, stable color for clear, champagne, bronze, black dye; AQ grade suppress bar‑coding streaks.
  • Good forming & welding: bending, punching, TIG/MIG welding available; welding seam causes color deviation after anodizing.
  • Great atmospheric corrosion resistance for inland & mild coastal area; not fit for heavy salt‑spray marine environment.
  • Non‑heat‑treatable alloy; strength enhanced only by cold rolling hardening.

Application Fields 5005 Anodized Aluminum Coil 

  • Construction: Curtain wall, interior‑exterior panel, ceiling, cladding
  • Traffic: Road signs, identification plates (H34 temper most popular)
  • Elevator & home‑appliance decorative panels
  • Furniture, vehicle interior trim

Available Specifications 5005 Anodized Aluminum Coil 

  • Thickness: 0.2‑6.0 mm; pre‑anodized coil ≥0.4 mm
  • Width: 600‑2000 mm, custom slit strips
  • Coil core: paper core / steel core; coil weight as per client
  • Surface: mill finish, brushed; anodized film:8‑15 μm(≥10 μm for building)
  • Standards: GB/T3880, ASTM B209, EN485; RoHS compliant

Important Quality Notes 5005 Anodized Aluminum Coil 

  • High‑appearance project: order AQ anodizing grade to eliminate Fe‑Si induced streaks.
  • H38 temper not for sharp bending; bending location may produce black crack lines after anodizing.
  • Keep welding seams away from visible surfaces to avoid color difference.

What services we provide : 

1. Continuous Coil Anodizing Line | Roll-to-roll anodizing, batch processing of coil materials
2. Mirror Polishing Line | Mechanical mirror polishing of aluminum materials, preparation of high-gloss substrates
3. Sheet Anodizing Line | Single-sheet anodizing of aluminum sheets, small-batch prototyping production
4. Sandblasting and Brushing Production Line | Sandblasting and brushing surface texture treatment

FAQ

Q1: What is the difference between mill‑finish 5005 coil and pre‑anodized 5005 coil?
A: Mill‑finish 5005 is bare aluminum substrate, customers complete anodizing process locally. Pre‑anodized coil is finished anodizing in our factory with fixed film thickness & color. Pre‑anodized coil cannot be re‑anodized.
Q2: Why choose 5005 instead of 5052 for anodizing parts?
A: 5005 has lower magnesium content. It produces clearer, more uniform anodized film with less hazy effect. 5052 delivers higher strength & better salt‑spray resistance but tends to get foggy surface after anodizing.
Q3: What does AQ grade mean for 5005 aluminum coil?
A: AQ is anodizing‑quality grade. The mill strictly controls Fe‑Si segregation and impurity distribution, greatly reducing bar‑coding streaks, black spots and surface banding defects after anodizing. High‑end decorative projects require AQ grade.
Q4: Which temper is most popular for signage & curtain‑wall?
A: H34 is the mainstream temper. It balances mechanical strength, flatness and bending performance. H32 for more bending work; O temper for deep‑drawing parts.
Q5: Can we bend pre‑anodized 5005 coil?
A: Gentle bending is acceptable. Sharp tight bending will cause micro‑cracks on anodized layer and generate black lines at bending position. Avoid sharp‑angle bending for pre‑anodized material.
Q6: What anodized film thickness do you supply?
A: Standard range: 8‑15 μm. Architectural exterior application requires ≥10 μm for weather resistance. Custom film thickness available upon request.
Q7: Is 5005 suitable for marine / heavy salt‑spray environment?
A: No. 5005 performs well for inland and mild coastal atmosphere. For heavy salt‑spray marine projects, please select 5052 or 5083 alloy.
Q8: What HS code for pre‑anodized 5005 aluminum coil? Does it belong to 7616?
A: HS Code 7606125900. Pre‑anodized aluminum coil is still rolled aluminum sheet‑coil, classified under 7606, NOT 7616. USA shipments are subject to Section 301 tariffs.
Q9: Can 5005 be welded? Will welding affect anodizing effect?
A: 5005 has good TIG/MIG weldability. Weld seam area will show obvious color difference after anodizing. Please arrange weld seams on non‑visible positions.
Q10: What core options for aluminum coil?
A: Paper core (common for export), steel core for heavy‑weight coils (≥800‑900 kg), to prevent core deformation during slitting & transportation.
Q11: Does 5005 comply with RoHS?
A: Yes, our 5005 aluminum coil meets RoHS requirements.
Anodized Aluminum Coil

Anodized Aluminum Coil

Anodized Aluminum Coil

Anodized Aluminum Coil

Anodized Aluminum Sheet

Anodized Aluminum Sheet

Anodized Aluminum Sheet

Anodized Aluminum Sheet

 

Anodizing Process of Aluminum Coil & Performance Advantages

Aluminum coils are indispensable core materials in architectural decoration, industrial manufacturing and outdoor engineering. However, the natural oxide film on the aluminum surface is thin and unstable, failing to provide long‑lasting anti‑corrosion protection and decorative effects. As a mature and high‑efficiency surface treatment technology, continuous aluminum coil anodizing can form a dense, firmly bonded artificial oxide layer on the aluminum substrate. This article comprehensively elaborates on the complete technological process, working principle, film thickness standards and core advantages of aluminum coil anodizing, providing professional reference for engineering selection and processing production.

1. Working Principle of Aluminum Coil Anodizing

Working Principle of Aluminum Coil Anodizing

Aluminum Coil Anodizing

Anodizing is an electrochemical oxidation process. In the professional electrolytic system, the aluminum coil serves as the anode, matched with a copper or aluminum cathode, and sulfuric acid solution is used as the mainstream electrolyte. Under the action of DC electrolysis, a uniform porous aluminum oxide (Al₂O₃) film is spontaneously formed on the surface of the aluminum coil.

Standard operating parameters for conventional anodizing:

  • Voltage: 20‑30 V
  • Current density: 10‑15 A/dm²

The formed oxide film has a dual‑layer structure: a thin and dense inner barrier layer and a thick porous outer layer, with a pore density of up to 100 million pores per square millimeter. This unique porous structure lays a solid foundation for subsequent uniform dyeing and hole‑sealing treatment. Notably, the anodized film is perfectly integrated with the aluminum base material — 1/3 of the film layer grows outward, and 2/3 penetrates inward into the substrate, ensuring ultra‑high bonding strength without peeling or falling off.

2. Complete Continuous Anodizing Technological Process

The full set of continuous anodizing production line is about 220 meters long, realizing automated and streamlined processing from raw material pretreatment to finished product sealing. The whole process is divided into four core stages: pretreatment, anodizing, coloring and sealing, with strict multi‑stage rinsing to ensure no impurity residue and stable product quality.

2.1 Pretreatment: Foundation for High‑Quality Oxide Film

Continuous Anodizing Technological Process

Pretreatment is the key link to remove surface oil, oxide scale and impurities, avoiding defects such as uneven film layer and color difference in subsequent processing. The standard process is as follows:

  • Cleaning: Adopt mild alkaline solution for degreasing treatment at room temperature or above, matched with 2‑cycle circulating rinsing to completely remove surface oil and dust.
  • Etching: Use sodium hydroxide solution with stabilizers for surface etching to remove natural oxide films and burrs, followed by 3‑cycle rinsing.
  • Acid Pickling & Neutralization: Adopt mixed sulfuric‑nitric acid for neutralization treatment to eliminate residual alkaline substances, with 3‑cycle rinsing to ensure surface acidity balance.

After pretreatment, professional surface inspection is required to screen out visual defects, mechanical damage and metallurgical flaws to ensure qualified raw materials enter the anodizing stage.

2.2 Core Anodizing Treatment

Continuous Anodizing Technological Process

After qualified pretreatment, the aluminum coil enters the electrolytic tank for anodizing film formation. The core process conditions are strictly controlled:

  • Electrolyte: High‑purity sulfuric acid solution
  • Temperature: Constant temperature above room temperature (equipped with cooling system for temperature adjustment according to production needs)
  • Power supply: Stable DC power supply
  • Cathode: Special aluminum‑based cathode
  • Post‑treatment: 3‑cycle precise rinsing to remove residual electrolyte on the surface

Through standardized electrolysis reaction, a uniform and dense porous Al₂O₃ protective film is stably formed on the surface of the aluminum coil.

2.3 Coloring & Sealing: Final Quality Enhancement

Continuous Anodizing Technological Process

The porous structure of the anodized film can fully adsorb color dyes, realizing rich and uniform color decoration. After coloring, the sealing process is carried out immediately: the porous aluminum oxide reacts with water to form hydrated aluminum oxide (Al₂O₃·H₂O), which completely seals the surface micropores.

Sealing treatment can lock the color permanently, effectively prevent surface oxidation and corrosion, and greatly improve the weather resistance and stain resistance of the aluminum coil.

Complete Process Flow Summary: Cleaning → Etching → Acid Pickling → Anodizing (Oxide Film Formation) → Coloring → Sealing

3. Standardized Anodizing Film Thickness for Different Application Scenarios

Continuous Anodizing Technological Process

The anodized film thickness directly determines the corrosion resistance and service life of the aluminum coil. We formulate targeted minimum film thickness standards for different usage environments to balance cost and performance:

Grade Film Thickness (μm) Applicable Scenarios
10 10 μm Indoor decoration, dry‑bonded interior materials, low‑corrosion indoor environment
15 15 μm General indoor materials, partial wet‑bonded scenes, suburban non‑polluted atmospheric environment
20 20 μm Building exterior wall cladding, urban conventional atmospheric environment, general industrial facilities
25 25 μm High‑corrosion environments, heavy‑pollution industrial zones, coastal salt‑fog areas

4. Core Advantages of Anodized Aluminum Coil

Continuous Anodizing Technological Process

Compared with ordinary untreated aluminum coils and other surface treatment processes, continuous anodizing technology has irreplaceable comprehensive advantages:

  • Superior Corrosion Resistance: The dense integrated oxide film isolates air and moisture, effectively resisting atmospheric oxidation, acid‑base corrosion and salt‑fog erosion, with a service life several times that of ordinary aluminum materials.
  • Excellent Decorative Performance: The uniform porous structure ensures full and even dye adsorption, with rich color options, high color fastness, no fading or color difference for long‑term use.
  • Ultra‑High Bonding Strength: The oxide film grows integrally with the aluminum substrate, without coating falling off, peeling or blistering, with stable physical and chemical properties.
  • Customized & Targeted: The film thickness can be flexibly customized according to indoor and outdoor usage environments and corrosion levels, meeting the differentiated needs of decoration, construction and industrial fields.

As a professional and mature surface strengthening process, aluminum coil anodizing realizes dual upgrading of protective performance and decorative effect through standardized and streamlined technological processes. With stable quality, strong durability and wide applicability, it has become the preferred surface treatment solution for high‑end architectural decoration and industrial aluminum materials.

Get An Instant Quotation

Please fill in the form below(* are required) to send us a brief message, we will get back to you as soon as possible.