PolySurlyn Laminated Aluminum Coil

TMR vendor ,supplier and manufacturer of PolySurlyn Laminated Aluminum Coil, Polysurlyn Moisture Barrier Laminated Aluminium Coils

PolySurlyn Laminated Aluminum Coil

Alloy 1050 1060, 1070, 3003
Width 0-1500MM
Thickness 0.3-6mm
Port of Loading Qingdao
Price Chat With Us

Polysurlyn Moisture Barrier Laminated Aluminium Coils

Alloy: 1050 1060 1100 3003 5052 

At present, there are very few manufacturers that can coat polymer films on aluminum coils. After five years of exploration, they now pass the quality standards of polymer composite aluminum coils, and 80% of the products are exported.

 Wholesale price of factory produced polymer(PolySurlyn) aluminum coil

Polymer PolySurlyn aluminum coil is our company's main new material, which is mainly used in anti-corrosion and insulation projects. It is exported to foreign customers, especially pipeline insulation projects in the Middle East petroleum countries. User praise. Why is a layer of polymer compounded on the surface of the aluminum coil? The anti-corrosion performance of the aluminum coil itself is superior, and the service life of the aluminum coil is greatly enhanced by compounding a layer of polymer. It also plays a certain role in absorbing moisture inside the pipeline.

The commonly used thickness of the polymer film aluminum coil export is 0.5 0.6 0.7 0.8 0.9, and the width is mostly 1000mm 1200mm 1220mm,
Commonly used materials for export 1100 1060 1050 3003 3A21 3004, etc., polymer membrane
Other deep processing methods: embossed again on the composite polymer membrane PolySurlyn aluminum coil, and then can be pressed again
Packaging waterproof: adopt fumigation-proof moisture-proof waterproof packaging
The polymer film has high strength, usually blue. The tear strength, work of rupture and dynamic strength are high. Isolate oil and moisture from ordinary products

Product performance: PolySurlyn aluminum coil has good flatness, good toughness and high temperature resistance

Characteristics of polymer film aluminum coil:
One: The polymer bonding is very strong. The technicians of TMR Aluminum Industry took a test and soaked it in water for 24 hours. After taking it out to dry, the bonding degree was the same as before.
Two: The polymer film aluminum roll covered with polymer film has been tested by the Technical Supervision Bureau and has fully reached the performance indicators of similar foreign products.
Three: The polymer film is imported from abroad, and then processed to further enhance its performance and enhance the firmness of the bond. When compounding, just leave 3-10 mm of aluminum on both sides of the aluminum coil to keep it in heat preservation It is more convenient and practical when processing.
Four: The product quality warranty period is 10 years,

The aluminum film covered with polymer film is also a product that has just emerged in recent years. It is generally used by foreign users, especially in the Middle East, with a thickness of 0.2-2.0mm and a width of 800-1300mm. Alloys are generally made of 1100 1060 3003 and 3004 3104 5052.
Users are welcome to visit and provide samples for free. Wholesale price of factory produced polymer aluminum coil

The PolySurlyn film and the aluminum coil are bonded together by heating. This process has been successfully developed by us after six months

The advantage of this product is that the adhesion of the polymer film is very high, and the glue will not be opened and will not fall off in the 24-hour immersion test. The weather resistance is extremely high, and the PolySurlyn film is not affected by temperature changes. The disadvantage is that the production efficiency is slow and the production cost is too high.



Welcome your inquiry.

Aluminum products of TMR meet the export popular

Plastic movie and brown paper can be protected at customers’ need. Also timber case or timber pallet is adopted to shield products from harm for the duration of the delivery.

There are styles of packaging, which is eye to wall or eye to sky. Customers can choose either of them for their convenience.

1. What's the MOQ?
Usually, CC materials for 3 tons, DC materials for 5 tons, some special products are different, pls consult our salesman.
2. What's the payment term?
3. What's the lead time?
Common specification 10 -15 days, others 30 days or so.
4. How about the packaging?
Standard export packaging, wooden cases or pallets.
5. Could you send us the free sample?
Yes, the small pieces can be provided for free, but the buyer need to bear the freight charges.

Get An Instant Quotation

Please fill in the form below(* are required) to send us a brief message, we will get back to you as soon as possible.