Welcome To TMR Aluminum

Whatsapp/Skype/Mobile: +86-13383985480

E-mail: sales@tomorrowal.com

Cookware Aluminum

Cookware Aluminium Circle

Alloy: 1050 1060 1100 3003 3105 3004 8011

Width: 50-1100MM

Thickness: 0.5-8MM

Port of Loading: Qingdao shanghai

Price: $4000

  • PRODUCT DETAIL
  • FAQ

Our aluminum circle widely used in cookware with tensile aluminium circle、lamp and lanterns tensile aluminium circle、traffic signage for aluminium circle、aluminium cans and seal the top of aluminium tank etc,already meet the demand of enterprise’s great quantity of aluminium circle blank production. We can according to the width of coil and circle diameter automatically select the most suitable way of layout,at the same time of aluminium coil open-book leveling directly for the blanking processing production,the utilization rate of raw materials is more than 80%,is such better than the other aluminium circle blanking way,save a lot of the cost of production for the enterprise.

Series
Temper
Alloy
Character
End use
1 series
O
H*2 H*4 H*6 H18 H111 H112
1050
1,Aluminum content :> 99%,excellent formability
2,High reflectivity
3,Stable performance for surface anodization
1.Ordinary cookware: post-process: sanding, sandblasting, extrusion pot lid; aluminum pot;
2.Lamp accessories: lampshade, etc. for downlights, laminate lights and street lights
3.Indication signs and building materials: traffic signs, curtain walls, ceilings
1060
1070
1100
3 series
3003
1,Excellent formability
2,High elongation, can be used in deep drawing process
3,High grain grade, smooth surface and high reflectivity
1.Advanced cookware: post-process: anodizing, enamel, spraying, deep drawing, etc.; non-stick pan; pressure cooker;
2.Lamp accessories: lampshade, etc. for downlights, laminate lights and street lights
3.Indication signs and building materials: traffic signs, curtain walls, ceilings
3004
3005
3105
5 series
5052
1.Low material density and low weight of finished product
2,High tensile strength and elongation, good fatigue strength
3.Higher grain grade and good surface finish
1.Advanced cookware: post-process: anodizing, enamel, spraying, deep drawing, etc.; non-stick pan; pressure cooker;
2.Pressure vessel: pressure cooker, etc.
5754
5083
8 series
8011
1,Excellent anodizing effect,
2,Stable performance and high surface quality.
Advanced cookware: can make pearl anodized cookware

Chemical compositon of TMR'S aluminum circle

Grade Si Fe Cu Mn Mg Cr Ni Zn Al
1050 0.25 0.4 0.05 0.05 0.05 - - 0.05 99.5
1060 0.25 0.35 0.05 0.03 0.03 - - 0.05 99.6
1070 0.2 0.25 0.04 0.03 0.03 - - 0.04 99.7
1100 Si+Fe: 0.95   0.05-0.2 0.05 - - 0.1 - 99
1200 Si+Fe: 1.00   0.05 0.05 - - 0.1 0.05 99
1235 Si+Fe: 0.65   0.05 0.05 0.05 - 0.1 0.06 99.35
3003 0.6 0.7 0.05-0.2 1.0-1.5 - - - 0.1 remains
3004 0.3 0.7 0.25 1.0-1.5 0.8-1.3 - - 0.25 remains
3005 0.6 0.7 0.25 1.0-1.5 0.20-0.6 0.1 - 0.25 remains
3105 0.6 0.7 0.3 0.30-0.8 0.20-0.8 0.2 - 0.4 remains
3A21 0.6 0.7 0.2 1.0-1.6 0.05 - - 0.1 remains
5005 0.3 0.7 0.2 0.2 0.50-1.1 0.1 - 0.25 remains
5052 0.25 0.4 0.1 0.1 2.2-2.8 0.15-0.35 - 0.1 remains
5083 0.4 0.4 0.1 0.40-1.0 4.0-4.9 0.05-0.25 - 0.25 remains
5154 0.25 0.4 0.1 0.1 3.1-3.9 0.15-0.35 - 0.2 remains
5182 0.2 0.35 0.15 0.20-0.50 4.0-5.0 0.1 - 0.25 remains
5251 0.4 0.5 0.15 0.1-0.5 1.7-2.4 0.15 - 0.15 remains
5754 0.4 0.4 0.1 0.5 2.6-3.6 0.3 - 0.2 remains
6061 0.4-0.8 0.7 0.15-0.4 0.15 0.8-1.2 0.04-0.35 - 0.25 remains
6063 0.2-0.6 0.35 0.1 0.1 0.45-0.9 0.1 - 0.1 remains
6082 0.7-1.3 0.5 0.1 0.40-1.0 0.6-1.2 0.25 - 0.2 remains
6A02 0.5-1.2 0.5 0.2-0.6 Or Cr0.15-0.35 0.45-0.9 - - 0.2 remains
8011 0.5-0.9 0.6-1.0 0.1 0.2 0.05 0.05 - 0.1 remains

 

Performance Advantages : 

1. Our aluminium circle is commonly used in high quality anodizing cookware like Japanese rice cookers.We are good at providing a very consistent anodizing surface.

2. TMR 's speciality is in deep drawing quality . Grain size is tightly controlled to minimize the "orange peel effect " , The "orange peel effect" is a rough surface,like the surface of an orange peel, which often occurs after deep drawing. TMR tightly controls the chemistry and heat treating to maximize the elongation that allow the materials to stretch more.

3. TMR is a major producer of bottom plates , TMR has been producing impact bonded bottom plates in high volumnes for more than 10 years.

1. What's the MOQ?
Usually, CC materials for 3 tons, DC materials for 5 tons, some special products is different, pls consult our salesman.
2. What's the payment term?
LC ,TT
3. What's the lead time?
Common specification 10 -15 days, others 30 days or so.
4. How about the packaging?
Standard export packaging, wooden cases or pallets.
5. Could you send us the free sample?
Yes, the small pieces can be provided for free, but the buyer need to bear the freight charges.

Inquiry

Tel: +86-13383985480      E-MAIL: sales@tomorrowal.com

All fields marked with * are necessary.