PCB Aluminum

Aluminium Drilling Entry Sheet

Alloy : 1100 3003 3105
Width : 20-1400mm
Thickness : 0.14-0.25
Port of Loading : Qingdao
Price : $2000

  • PRODUCT DETAIL
  • FAQ

Alloy:1100 3003 3105
Temper:H18 H19
Thickness:0.14-0.25mm
Width: max 1250mm

The main effect of the PCB entry sheets
As the auxiliary material for PCB drilling, the cover has five main effects:
1.protection board (protection of copper clad copper plate surface, or copper substrate conductive layer), to prevent the pressure foot pressure plate; 
2. fixed drill, Reduce the drill bit when the drift amplitude, offset, so that the drill bit can be accurately positioned; to improve the hole accuracy, to prevent the broken drill;
3. to prevent the hole on the substrate burns;
4. help drill bit heat, reduce the bit temperature; Groove; to prevent greasy dirt; to reduce the wear and drill bit drills.
5.The performance requirements of the drilling entry boards are: soft enough; thickness tolerance is small; flat and not easy to deformation; high temperature; low moisture absorption; surface no impurities, foreign matter, obvious defects and so on.

Drilling entry material variety
According to the different materials, the market is usually divided into four categories: phenolic paper sheet(including phenolic paper cover and cold sheet), coated resin aluminum sheet (also known as lubrication aluminium sheet), aluminium entry sheet (Ie aluminium entry foil), epoxy glass cloth sheet. Phenolic paper sheet industry less amount, and cold sheet(commonly known as phenolic paper sheet) is mainly used for flexible plate drilling; coated resin aluminum sheet for HDI board, dense BGA, IC board, etc. Micro-hole drilling and flexible plate drilling, made of resin and aluminum foil; aluminum entry sheet or aluminum entry foil, for ordinary and fine circuit board drilling, made of alloy aluminum foil; epoxy glass cloth cover, by the ring Oxygen resin and fiberglass cloth composition, the current market use very little. In addition, there have been a composite aluminum sheet, from wood pulp (core) and aluminum foil composition, fairly rare, has been out of the market.

With the development of PCB technology, PCB drilling holes are getting smaller and smaller, more and more holes, drilling technology requirements are getting higher and higher, entry sheet on the drilling quality of the impact is more important. Some high-end or high-tech requirements of the PCB boards, generally use some of the high-end entry sheet. PCB in the market with the entry sheet of the product structure, with the development of PCB technology, PCB product structure continues to upgrade, and PCB drilling technology upgrade. The selection of drilling materials are in the high block plate, such as lubricating aluminum sheet, cold sheet, phenolic paper pad, melamine wood plate. In particular, high-grade LE sheet, PCB drilling special entry material, HDI (including IC carrier board) with cover, flexible PCB drilling with cold plate, etc. become the market faster varieties.

Alloy
Temper
Thickness (mm)
U.T.S (Mpa)
Elongation(%)
1100
H18/H19
0.14-0.25
170-190
>2
3003
0.14-0.25
>210
>2
3105
0.14-0.25
>210
>2
Tolerance
Thickness
Width
Length
squareness
+/-0.01mm
-0/+1mm
-0/+1mm
<2mm
Alloy
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
Other
AL
Each
Total
1100
Si+Fe 0.95
0.05-0.2
0.2
-
-
-
0.1
-
0.05
0.15
Remain
3003
0.6
0.7
0.05-0.2
1-1.15
-
-
-
0.1
-
0.05
0.15
Remain
3105
0.6
0.7
0.3
0.4
0.4
0.2
0.4
0.1
0.05
0.15

FAQ

1. What's the MOQ?
Usually, CC materials for 3 tons, DC materials for 5 tons, some special products is different, pls consult our salesman.
2. What's the payment term?
LC ,TT
3. What's the lead time?
Common specification 10 -15 days, others 30 days or so.
4. How about the packaging?
Standard export packaging, wooden cases or pallets.
5. Could you send us the free sample?
Yes, the small pieces can be provided for free, but the buyer need to bear the freight charges.

Inquiry

Tel: +86-13383985480      E-MAIL: sales@tomorrowal.com

All fields marked with * are necessary.